Buy Low Price From Here Now
Readmore
Technical Details
- Mounts to 3/4-inch fence- Accepts head of standard 1/4-inch bolt
- Self aligning L-shaped mounting foot for easy installation
- Recess for 1/2-inch measuring tape
- 4-foot length
See more technical details
By C. Hubler
I bought these to complete a miter saw fence and they are perfect. Installation is easy, they work on 3/4" stock with no problem, the measuring tape fits nicely and the stops made for the tracks slide easily. This is a nice solid machined addition to any fence you need to make for the shop. Now I need to pony up and buy them for the rest of my tools that need them!
By S. Griffin (Victor, Idaho)
I'm very happy with my Kreg track and stop system. Setting up your miter saw with stop system is mandatory in my opinion. The old tape measure/pencil mark/chase the mark and make a cut method is such a waste of time I'm amazed when I see builders doing it. Need 8 cripples at 33"? Set the stop and chop as fast as you can. And they come out perfect. Not having a stop system for your miter saw is a dumb as not having a measuring scale on your table saw.
I've used the Beismeyer stop for 10 years and they work well. But they are so proud of their little stop they think it's worth over $100. For that price opted to buy 2, 4' kreg tracks and the flip stop. It works every bit as well was easier to set up.
The track is easy to mount, is ridged and dead straight. There is even a little groove to lay the adhesive measuring tape into.
The hairline gauge allows very precise settings. (Beware that many of the cheap $39 dollar stops you can buy have a magnifying bubble over the hair line--sounds great, but when you look at it from different angles it moves back and forth a 1/16 of an inch! That's the sort of stuff that gives engineering a bad name...)
So my advice--DO NOT buy a miter saw without also building a table, fence and Kreg stop system. Sure it will take a couple hours cost $100, but it will be worth it.
-Steve
By William R. Bonner III
Once completing the easy setup, the Top Trak is a great time saver. I installed mine to the left of a Sears Radial Arm Saw. I've used it for cutting the rails and stiles on several raised panel doors along with cutting the drawer sides. Very accurate and repeatable. Make sure to add the Kreg tape (left or right for your application) along with either the Flip Stop or Production Stop. I bought both. The Flip Stop is more convenient if you are using the saw for cutting boards to various lengths because it can be moved out of the way quickly if necessary.
Images Product
Buy Kreg KMS7714 48-Inch Top Trak Now
ไม่มีความคิดเห็น:
แสดงความคิดเห็น