Buy Low Price From Here Now
- Features a hardened steel drill guide and glass reinforced nylon body complete with a chip ejection hole - Features plug setter that is incorporated into the base of the jig
Readmore
Technical Details
- Makes pocket hole joinery work easier- No-fence design makes for easy positioning
- One-hole jig is great for furniture repairs or flooring work
- Includes 3/8-inch step drill bit, depth collar, and Allen wrench
- Handy for repair applications and space constricted areas
See more technical details
By Harry Malone
The jig does an excellent job aprx. 40 pocket holes on the first use and everyone was perfect
By Jaronimo (NJ, the garden state)
I pulled out my Kreg jig for the first time today. I was building some face frames out of 3/4 by one and a half inch poplar. Since I had not used the jig previously, I read the instructions, which took about 60 seconds. I then set the collar on the drill bit to three and a half inches, then clamped the jig down on a piece of scrap wood.
Practice once or twice on some scrap because I learned the clamp needs to be tight and you need to use a relatively fast drill speed while using slow but steady pressure or the jig will slide. Once I tightened up my clamp (I used my welding vise grip with the swivel pads) and used the slow, steady pressure the jig worked great!
I put together three sets of face frames with 18 joints. Each joint had two screws, which required a separate jig set-up for each hole. The clamping, drilling, and screwing all 36 holes took me about 15 minutes total. The joints are perfect and did not even require sanding to even out tiny imperfections that I sometimes got when I used the biscuit joiner.
Overall I am very satisfied with this product.
By Lenon Rampersad
this jig, makes joining a breeze. no need for clamps etc.
after some initial "blue plastic" was removed, the jig works perfectly with a cordless drill.
i will need to buy another as a gift.
By Robert F. Monement (Sylvan Lake, MI USA)
If you want an excellent, quick joint, this is it! It won't replace a dovetail or a mortise & tenon but it requires far, far less work. Kreg gives you all the best options for pocket joinery and prices their products so reasonably there's no reason to buy anything less.
By koboilila (massachusetts)
I bought this kit because I wanted a spare drill bit in my kit. You can adjust the collar for differnt thickness materials and instead of having one bit whose collar I need to move back and forth I can have one bit always set up for 3/4 inch material.
But I have used this type of jig before as well and it is great.
If you are the Harry The Happy Home Hobbiest type or a seasoned wood worker this is a nice thing to have within reach in your tool box. It works as well on the edge as it does the flat of your stock.
After you have found the best setting for the collar on the drill bit for your project and location for the jig just clamp it down on your piece and drill; thats all there is to it.
One word of advice: to keep the drill bits edges from getting beaten up too soon; place the bit into the hole before you turn on your drill and leave it in till the drill stops. A little respect for your tools goes a long way; I have used one of these for years and the bit is still nice and sharp.
Now go out and make some sawdust.
Images Product
Buy Kreg MKJKIT Mini Kreg Jig Kit Now
