Kreg MKJ Mini Kreg Jig

Buy Cheap Kreg MKJ Mini Kreg Jig

Buy Low Price From Here Now
The single drill guide Mini Kreg Jig is Kreg's most positionable pocket hole tool. The jig is designed without an alignment fence which allows it to be clamped at virtually any angle or orientation to the edge of the workpiece. Great in situations where t
Readmore

Technical Details

- Mini jig drill guide
- No-fence, single-drill design allows it to be positioned in just about any location with ease
- Hardened steel drill guide; glass reinforced nylon jig body
- Unlimited material thickness and width
- Unlimited lifetime warranty
See more technical details

 "Great Add-on to Kreg Jig Sets" 2008-11-24
By Mitch and Gayle (Dallas, TX USA)
I love pocket hole joinery (strong and EASY). I already own the Kreg K3MS K3 Master Pocket Hole Jig System. I thought it would fulfill all of my pocket-hole needs. However, during a recent project, I needed to put a pocket hole in a tight place that the included jigs would not fit.



I ordered the mini-jig. Even though this jig requires a little more set-up than the Master jigs, it worked perfectly. It is a great add-on if you already have a jig set. I would not recommend it by itself because, at a minimum, you need the kit that includes the step drill bit as well as the square drive screws / bit.

 "Great for tight spaces" 2008-05-29
By SeaWolf's Home Workshop Blog (Florida)
This is a great little add on jig, if you already have a step drill bit and driver. The jig is great for getting into tight spaces or re-enforcing a loose joint that would be impossible with a full jig. I recommend you first make a test hole, as the directions did not specify enough jig offset to prevent screw head pull through allowing the screw come through the other side. An additional 3/8" offset solved the problem in ACQ 2" x 4" lumber and 2 1/2" stainless screws.

 "Good bang for the buck" 2006-08-02
By Keith Mealy (Cincinnati, OH USA)
At a fraction of the cost of most alternatives, this is a good deal and Kreg quality is generally realized as a class of its own.



However, for less than the cost of the components, you can buy this jig with drill bit and stop. I don't know why anyone would buy the jig by itself. See MKJKIT

 "The Kreg mini gives you the best for the least" 2003-12-14
By Bob Feeser (Springfield, PA USA)
When you think about it, this mini gives you the complete pocket hole capabilities with the least amount of money. (You'll need to buy the special drill bit as well for ideal results, both in starting the screw, and depth adjustability requirements) Since two holes are required for greater strength, you have to move the mini for each drilling. You could use an existing longer reach clamp to hold the mini in place, thereby eliminating the need to buy the clamp with it. So this mini is all of the advantages, without the price, but it requires more time to set up each project. Once you get into the advantages of pocket hole joinery, you probably will want more of the complete kit.
Kreg Pocket Hole offerings made the number one spot across the board in the November 2003 issue of Better Homes and Gardens "Wood" magazine. Everything from the mini on through to the automated production machine were given the top ratings. It was a clean sweep for Kreg. They tested a lot of machines too. Some of the advantages are the flush edge joining to the workpiece prevented tearout. The case hardened steel guides didn't show wear or metal shavings. Easy to make or buy the premade plug holes out of wood. (Some were an odd shape, and wouldn't accept plugs very well)
Even though the body is made out of plastic, which is substantial and well done, the steel guides are the only thing the drill bit touches.
Pocket hole joinery is a nice addition to your arsenal. You will find yourself incorporating it more and more into your projects, and the Kreg system is the best. Highly recommended.


Images Product

Buy Kreg MKJ Mini Kreg Jig Now

Kreg MKJKIT Mini Kreg Jig Kit

Buy Cheap Kreg MKJKIT Mini Kreg Jig Kit

Buy Low Price From Here Now
- Features a hardened steel drill guide and glass reinforced nylon body complete with a chip ejection hole - Features plug setter that is incorporated into the base of the jig
Readmore

Technical Details

- Makes pocket hole joinery work easier
- No-fence design makes for easy positioning
- One-hole jig is great for furniture repairs or flooring work
- Includes 3/8-inch step drill bit, depth collar, and Allen wrench
- Handy for repair applications and space constricted areas
See more technical details

 "Kreg Pocket Screw Jig" 2009-04-13
By Harry Malone
The jig does an excellent job aprx. 40 pocket holes on the first use and everyone was perfect

 "Could not be simpler, or more inexpensive..." 2009-02-21
By Jaronimo (NJ, the garden state)
I pulled out my Kreg jig for the first time today. I was building some face frames out of 3/4 by one and a half inch poplar. Since I had not used the jig previously, I read the instructions, which took about 60 seconds. I then set the collar on the drill bit to three and a half inches, then clamped the jig down on a piece of scrap wood.



Practice once or twice on some scrap because I learned the clamp needs to be tight and you need to use a relatively fast drill speed while using slow but steady pressure or the jig will slide. Once I tightened up my clamp (I used my welding vise grip with the swivel pads) and used the slow, steady pressure the jig worked great!



I put together three sets of face frames with 18 joints. Each joint had two screws, which required a separate jig set-up for each hole. The clamping, drilling, and screwing all 36 holes took me about 15 minutes total. The joints are perfect and did not even require sanding to even out tiny imperfections that I sometimes got when I used the biscuit joiner.



Overall I am very satisfied with this product.

 "does exactly what the manufacture claims" 2009-02-09
By Lenon Rampersad
this jig, makes joining a breeze. no need for clamps etc.

after some initial "blue plastic" was removed, the jig works perfectly with a cordless drill.

i will need to buy another as a gift.

 "The Best of a Good Thing" 2009-01-21
By Robert F. Monement (Sylvan Lake, MI USA)
If you want an excellent, quick joint, this is it! It won't replace a dovetail or a mortise & tenon but it requires far, far less work. Kreg gives you all the best options for pocket joinery and prices their products so reasonably there's no reason to buy anything less.

 "Quick and simple" 2008-12-20
By koboilila (massachusetts)
I bought this kit because I wanted a spare drill bit in my kit. You can adjust the collar for differnt thickness materials and instead of having one bit whose collar I need to move back and forth I can have one bit always set up for 3/4 inch material.



But I have used this type of jig before as well and it is great.



If you are the Harry The Happy Home Hobbiest type or a seasoned wood worker this is a nice thing to have within reach in your tool box. It works as well on the edge as it does the flat of your stock.



After you have found the best setting for the collar on the drill bit for your project and location for the jig just clamp it down on your piece and drill; thats all there is to it.



One word of advice: to keep the drill bits edges from getting beaten up too soon; place the bit into the hole before you turn on your drill and leave it in till the drill stops. A little respect for your tools goes a long way; I have used one of these for years and the bit is still nice and sharp.



Now go out and make some sawdust.


Images Product

Buy Kreg MKJKIT Mini Kreg Jig Kit Now