Kreg KKS1000 Klamp Table Top

Buy Cheap Kreg KKS1000 Klamp Table Top

Buy Low Price From Here Now

Readmore

Technical Details

- Large, 24" x 36", clamping surface
- Replaceable, glue resistant, melamine surface
- Trak on two sides of the table, provides endless flexibility
- Klamp Blocks allow for fast, accurate, and constistent registration of workpieces
- Multi-Function: Can be used for a variety of woodworking functions, including sanding, routing, layout, etc.
See more technical details

 "Klamp Table" 2007-11-09
By Roderick D. Cox (Iowa USA)
Great if you do only small items, it needs to be bigger to cover large Face Frames. Nice tool, well built, but very pricey for what it is.

 "Very handy and well made" 2007-09-30
By John Hulburt (Charlottesville, VA United States)
Received my table and found it very usefull for making face frames as advertised but I have found many, many other valuable uses in my shop. Well made, highly recommended.


Images Product

Buy Kreg KKS1000 Klamp Table Top Now

Kreg RAC Right Angle Clamp

Buy Cheap Kreg RAC Right Angle Clamp

Buy Low Price From Here Now
Large face clamp reaches up to 6" and ensures a perfectly flush joint every time! Large pad keeps clamp from marring wood. Perfect for flat stock such as face frames, mitered picture frames and other similar joints.
Readmore

Technical Details

- Securely holds work pieces at a 90 degree angle
- Two arms swivel to adjust to work piece dimensions and anchor work pieces
- 4-1/2 inch reach for added flexibility
- Easy release handle simplifies operation
See more technical details

 "Kreg Right Angle Clamp" 2009-02-13
By Gordo
The Kreg Right Angle Clamp is an essential tool for someone doing a full range of pocket hole joinery. It is easy and precise to use. The rubber coated handles provide good and comfortable grip. It does an excellent job of pulling right angle joints together before installing the screws.

 "Good for joining wood" 2009-01-09
By J. Tsai (Bellevue, WA)
Its a simple tool and does its job. It is helpful for clamping pieces of wood together when you are joining wood for pocket holes or even for gluing.

 "I'd rate it higher but THEY ran out" 2008-12-26
By Pax Draconis (Breesport, NY)
I got the Kreg Jig for my birhtday, I really could have used the Kreg RAC but the folks who I was going to buy it from ran out. I know that IF I ever get my hands on this product I will give it a solid "FIVE" stars.

 "Kreg clamp" 2008-12-02
By Tommassini (California, USA)
Well worth the investment! On advice from others I bought two for constructing a bath vanity. They held the plywood panels together very snugly to counteract the Kreg screws tendency to pull a panel slightly inward.

 "No substitute for this tool" 2008-08-18
By New England Yankee (Northern New England)
This clamp works flawlessly every time. Conceptually, it's very simple. It replaces one of the flats on a normal Kreg clamp with a pin that fits in the pocket hole. Use the clamps in one or more pocket holes while you drive the screws into the others. If you need 100% square accuracy, you can hold a square in place against the joint while you drive the screw.



By the way, you can use these to clamp items that are not flush to one another, e.g., frame reveals, parts with differing thicknesses, and inset panels. Try THAT with a corner clamp!



To the reviewer that wondered about using pocket holes on the outside of items: In cabinet making, it's the INSIDE of the cabinet that's the concern. The ply or particleboard sides and back of the cabinet are completely hidden for most cabinets and virtually always covered on end cabinets.



As to the review that talks about blowing out the pocket hole, the only things that could possibly cause that are drilling too small a pocket (the clamps work perfectly with Kreg drills), clamping so tight as to crush the pocket, or clamping at an extreme angle (the clamp will work at a range of angles, not just 90 degrees). Or perhaps the owner has a defective clamp. In any event, this is a highly unusual complaint, and I've yet to hear from anyone else with this problem. Trust your own judgement, though, go to a demo at a woodworking show or store and try them.


Images Product

Buy Kreg RAC Right Angle Clamp Now

Kreg PRS3020 True-FLEX Featherboard - Twin Pack

Buy Cheap Kreg PRS3020 True-FLEX Featherboard - Twin Pack

Buy Low Price From Here Now

Readmore

Technical Details

- Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more.
- Each finger provides consistent and optimum pressure
- Made of an extremely durable plastic composite body
- 6.9-inches W by 8.7-inches L by 2.09-inches H
- 1.2-pounds
See more technical details

 "Just OK" 2009-03-22
By Jane Kendall (Shrewsbury)
I thought these were pretty good until I bought some Rockler feather boards. The Rockler boards have a more commercial grade feel about them by using thicker plastic in the bodies and knobs, yet having plenty of flex in the feathers. Also, Rockler makes the expandable wedge lock hold downs out of metal, which are more dependable in grabbing and releasing from the table saw miter slot, than the plastic ones Kreg uses.

Kreg makes a terrific line of pocket hole cutters, but these feather boards are just...OK.

 "The best in class" 2009-01-25
By M. Keene (Spokane, WA, USA)
Best in class for plastic feather boards. A bit pricey, but when compared to other lower cost feather boards I own it proves worth the extra cost. A good feature is the extra bolts supplied for mounting to alternate surfaces, and the ability to vary height with spacers supplied.

 "Overall a good addition to the router table" 2009-01-07
By B. Harmon (Seattle)
I've used these featherboards for about 4 months and found them to very helpful on my router table. They have helped prevent injury from a couple of nasty kickbacks. One slight downside is that the plastic slider that fits into the miter slot on the rounter table gets sawdust and woodchips caught in it so that the featherboard does not easily release from the miter slot. This isn't a big deal, only a mild annoyance. I purchased another set a week ago so I could use them on the router table fence.

 "wish I'd bought them years ago" 2008-08-10
By Owen Lloyd (Washington)
This is a great product and safety device. I borrowed a the Bench Dog version from a friend, but found it didn't fit tightly into my Ridgid TS3650 table saw. This Kreg model fits great and locks down tight. After using them for only a day, I can't vouch for their longterm quality yet, but I can say I found myself thinking back to how many times I've been lucky and not lost parts of my fingers because I was stupid and putting them close to the blad because I didn't have a product like this to hold the wood tight to the fence. My only regret so far is hesitating spend the $40 to buy a product that I thought wouldn't be the helpful. I should have bought them years ago and not relied on luck to keep my fingers attached.

 "Nice featherboards" 2008-05-05
By Robert Cotton (Orlando FL)
In error, I ordered two of these, not realizing that they came in a two-pack. Thus, when they arrived, there were four featherboards. OK, you can never have too many of these things, so I kept them. That turned out to be a good thing. To change these things from a right-to-left feed into a left-to-right feed, you remove the bolts and washers and put them in from the other side. My router table uses right-to-left, and my table saw uses the equivalent of left-to-right, so I have two of them set up each way. Works great. Not that expensive, and if I had used them my entire woodworking career, I wouldn't have a messed up finger from a board kicking back at me. These are as well made as any I've seen.


Images Product

Buy Kreg PRS3020 True-FLEX Featherboard - Twin Pack Now

Kreg Quick-Change Pocket-Hole Kit

Buy Cheap Kreg Quick-Change Pocket-Hole Kit

Buy Low Price From Here Now
Switch from drilling to driving in seconds with this simple kit! It provides everything you need: an innovative Quick-Change Chuck, a 6" long #2 Square Driver, and the new 3/8" Hex-Shank Pocket Hole Drill Bit (with depth collar and allen wrench).

Additional features:
* All new 3/8" Hex-Shank Step Drill Bit snaps directly into the Quick Change Chuck no need for a bit adaptor.
* Innovative chuck features an industrial design that eliminates slippage and optimizes drilling power.
* 6" #2 driver is the most versatile length for Pocket-Screw applications.
Readmore

Technical Details

- Includes: Quick Change Chuck, 6" #2 Square Drive, Hex Shank Pocket-Hole Bit, Depth Collar / Allen Wrench
- No slippage and a more secure hold through an innovative industrial design.
- Faster and easier bit changes with no chuck keys or hand tightening required.
- Accepts all 1/4" hex bits including those with or without power groove.
- Durable chuck constructed from hardened steelwith an annodized aluminum collar.
See more technical details

 "This is a very good purchase." 2008-12-16
By Ted W. Broussard (Carencro, LA USA)
I have owned a Kreg Jig Master System for some time now. This quick change is a very good addition to it because it allows you to quickly change from the drill bit to the driver. I strongly recommend it.

 "A nice bit for my imapct drill" 2008-11-23
By Scott R. Suess (Maryland)
I love this bit because it fits into my makita impact drill which has a very high rpm. Much higher than the drills I used previously with the standard bit. I now have a light weight, high speed drill that makes clean holes.



I would have rated this much higher if I could have purchased the bit only.


Images Product

Buy Kreg Quick-Change Pocket-Hole Kit Now

Kreg V06-DVD-Pocket Hole Joinery DVD, Building a Router Table

Buy Cheap Kreg V06-DVD-Pocket Hole Joinery DVD, Building a Router Table

Buy Low Price From Here Now
The Kreg Pocket Hole Joinery DVD, Building a Router Table, shows you how to make your own router table with the help of John Sillaots, who leads you through the various steps required to make a table.
Readmore

Technical Details

- DVD guide for making your own router table
- Includes step-by-step instructions
- Features woodworking guru John Sillaots
See more technical details

 "A bit better" 2009-07-30
By rwizard (USA)
Of the several Kreg videos I own, I think I like this the best. No one is going to nominate Kreg for an academy award, but I thought this one did a better job than the others.

 "Router Table" 2009-03-27
By Ronald J (Washington, DC)
Just what I needed for my new Freud Router. I have incorporated these plans into an extension of my work bench and looks as if it will work great.

 "Well worth 10 bucks" 2008-09-14
By J. Bowman (Spring City, Tn United States)
I watched the DVD and if you have just gotten a kreg pocket hole system, it will help. Generally they teach you to make a fancy box, but with pocket holes. If your in the market to build a router table this is a really nice one. However they mainly stick to the cabinet part and encouage you to buy the top.

 "Kreg Router Cabinet" 2008-07-18
By Vicki (San Antonio TX)
Beautiful design. I'm currently building the router table and it's coming alone fast with the method they use (Kreg pocket screws). Shipped fast

 "Enjoyable video with good ideas" 2008-01-17
By J. F. Coyne (mechanicsburg, pa usa)
Not only shows you how to make a nice solid router table. Emphasizes how easy and strong the pocket hole joints can be. Well made and some great ideas.


Images Product

Buy Kreg V06-DVD-Pocket Hole Joinery DVD, Building a Router Table Now

Kreg KKS1020 Klamp Trak

Buy Cheap Kreg KKS1020 Klamp Trak

Buy Low Price From Here Now

Readmore

Technical Details

- Turn the entire length of your workbench into a clamping station.
- Includes one 33-3/4" aluminum extrusion.
See more technical details

 "big help" 2009-01-06
By Michael M. Webb (Alexandria, VA)
I used these krag products in a table I built from Home Builder magazine, and two of them have tranferred the table into a six foot long camping station. What a delight to work with.

 "Kreg KKS1020 Klamp Track" 2008-04-11
By J. M. Sarnovsky (Lima, Ohio)
Kreg is a compamy that produces quality tools. They are all excellent and this is no exception.


Images Product

Buy Kreg KKS1020 Klamp Trak Now