Kreg KKS1030 Klamp Block Set

Buy Cheap Kreg KKS1030 Klamp Block Set

Buy Low Price From Here Now

Readmore

Technical Details

- Kreg 5 Klamp block set
- The easiest way to quickly bring alignment and center to your project
- For use with Bench Klamp on the joint line
- Includes 5 plastic blocks and mounting hardware
- 0.5-by-1.5-by-2.5-inches; ships at 3.2-ounces
See more technical details

Images Product

Buy Kreg KKS1030 Klamp Block Set Now

Kreg K2 Jig 3/8-Inch-Pocket Hole Jig

Buy Cheap Kreg K2 Jig 3/8-Inch-Pocket Hole Jig

Buy Low Price From Here Now
Includes KREG JIG®, drill bit, depth collar and detailed instructions. Once you use this system, you won't go back to the old ways of cabinet construction. It's worth every penny!
Readmore

Technical Details

- Jig can be used on a work bench or for portable operation
- Handles stock from 1/2 to 1-1/2 inches thick
- Made from industrial-grade aluminum and hardened steel for greater durability
- Includes drill bit, depth collar, and detailed instructions
- Lifetime warranty
See more technical details

 "I'm a believer" 2009-02-27
By Joe the trim guy (Wheaton, IL United States)
I am a professional trim carpenter and kitchen cabinet installer. I also build built in bookcases, fireplace mantels, mud room lockers and cabinets from time to time.



I bought a Woodstock pocket hole jig about 10 years ago. I was never all that impressed. The results where marginal at best. Used it this morning and it cut such sloppy holes that I called a friend who had raved about his Kreg jig and asked if I could borrow it for the day. I used the Kreg today and it is superior in every way. Easy to set up and use. It cut perfect holes and the joints are very tight.



The Woodstock is in the garbage and I'm ordering a Kreg.



Update. I have had the Kreg for a couple days and I just built a cabinet today with it. I didn't use a single nail and this sucker is strong. In fact it was a little hard to square up the carcass it was so rigid. Having the built in clamp allows you to work very fast.



I also bought the face clamp and right angle clamp, both worked very well and I would recommend them both. In fact if you will be doing big projects get 2 of each, they really speed things up.



I can't remember the last tool I was so excited about. Very well made, in the USA. This thing should hold up to daily use.

 "kreg jig" 2008-12-30
By William M. Walton
my experiance with this purchase was has been awesome.I received it when told and product is in listed condition.I would have no problem doing buisness with all involved in the future



Thanks W. Walton

 "Excellent" 2008-08-25
By Spinner (Burlington, VT USA)
This is meant for bench mounting work, where you pieces can be put into position and then drilled. Although not intended for this use, the drill guide section can be removed for portable use, but you will need to devise a clamping system to drill the workpiece. Highly recommended.

 "The Solution" 2007-01-30
By J. Woodward (Kansas City)
When it comes to building furniture, I'm a beginner at best. I often help a friend of mine in his wood shop in order to learn as much as possible. Over vacation, he was showing me his pockethole jig and showed me how easy it was to use as well as how stable of a joint it created. I order the 35mm Kreg K2 pockethole jig and have used it several times. I love it! It is easy to use and adjust. A must buy that even inexperienced woodmakers should consider.

 "excellent tool" 2006-06-26
By James Kehoe (Western Massachusetts)
I use this tool in my professional cabinet shop. It is durable, accurate and simple. The pocket holes it produce are strong and expedient alternatives to the floating tenons and dowels we previously used.


Images Product

Buy Kreg K2 Jig 3/8-Inch-Pocket Hole Jig Now

Kreg KMS7801 Standard Swing Stop

Buy Cheap Kreg KMS7801 Standard Swing Stop

Buy Low Price From Here Now
The patented flipstop easily sets the distance between the end of the board and the saw blade for amazing cutting accuracy and repeatability. The curved design of the flipstop allows a board to bypass the stop system by simply sliding the board into the s
Readmore

Technical Details

- - Quickly and accurately sets the distance between the end of the board and the saw blade
- - Allows for amazing accuracy and repeatability when cutting boards to length
- - Uniquely designed curved face allows stop to swing out of the way when not in use
See more technical details

 "flex" 2008-09-17
By William B. Scarbor (tifon, ga.)
when you pay $27 for a stop block that doesn't always lock in squarely and it flexes, somethings wrong!

 "Significant Play in flipstop" 2008-08-21
By John Borchard (West Newton, MA USA)
I also have found the flipstop to have play. You can tighten the nut, which decreases it, but then everything gets too tight for moving up and down. Expect more like .030 (1/32) if the stop is tight and .060 (1/16) if it is loose. I only use my production stop, the flipstop sits in its box. I am doing precision cuts - picture frame miters - and this would be far too much tolerance for me.

 "Track and stop are excellent products" 2008-06-13
By S. Griffin (Victor, Idaho)
I'm very happy with my Kreg track and stop system. Setting up your miter saw with stop system is mandatory in my opinion. The old tape measure/pencil mark/chase the mark and make a cut method is such a waste of time I'm amazed when I see builders doing it. Need 8 cripples at 33"? Set the stop and chop as fast as you can. And they come out perfect.



I've use the Beismeyer stops for 10 years and they work well. But they are so proud of their little stop which looks like it was made in a garage they think it's worth over $100. For that price I instead bought 2 4' kreg tracks and the flip stop. It works every bit as well was easier to set up.



So my advice--do not buy a miter saw with out also building a table, fence and kreg stop system. Sure it will take a couple hours and add $100, but it will be worth it. I'd rather have a cheaper miter saw than omit having a stop system. Any time you use a tape measure, you are wasting time.



-Steve





My only minor complaint is the flip stop has a tiny bit of play in it. We're talking a tiny little hair of play-Maybe .015 inch. So I have tightened the nut down and made it a non-fliping stop for fine cabinetry. For a constuction site and most projects, the flip stop would be the way to go, but I should have purchased the "production stop" to get the highest precision.

 "Kreg- flip stop" 2007-07-30
By Steven L. Johnson
I recently built a Miter saw station and added a Kreg track to the top of my fence. I put the flipstop on the leftside (my most frequently used side) and the stop block on the rightside. Both flipstop and stop block work very well as a stop block. It is so easy to use with the tape measure to reduce your measuring pains. However, the flip stop has a 1/4" offset for the cursor. While the offset for the stop block is 3/8" for the cursor? Why? They should be the same.



So what I had to do is install the tape measure for the flipstop to the left of the blade and the tape measure for the stop block to the right of the blade. Now that I think about the issue, I should have sent the stop block back and put flipstops on both sides, oh well!



The stopblock also has some other issues (I would rate only a 2) the cursors are pieces of plastic that fit into a slot on each side of the block. It is a straight slot without a stop in it, so you have to be careful how you install the plastic pieces to make sure they have 3/8" out each side. The flip stop has an end of the channel that makes it impossible to put in with any different offset than the 1/4".


Images Product

Buy Kreg KMS7801 Standard Swing Stop Now