Kreg K2 Jig 3/8-Inch-Pocket Hole Jig

Buy Cheap Kreg K2 Jig 3/8-Inch-Pocket Hole Jig

Buy Low Price From Here Now
Includes KREG JIG®, drill bit, depth collar and detailed instructions. Once you use this system, you won't go back to the old ways of cabinet construction. It's worth every penny!
Readmore

Technical Details

- Jig can be used on a work bench or for portable operation
- Handles stock from 1/2 to 1-1/2 inches thick
- Made from industrial-grade aluminum and hardened steel for greater durability
- Includes drill bit, depth collar, and detailed instructions
- Lifetime warranty
See more technical details

 "I'm a believer" 2009-02-27
By Joe the trim guy (Wheaton, IL United States)
I am a professional trim carpenter and kitchen cabinet installer. I also build built in bookcases, fireplace mantels, mud room lockers and cabinets from time to time.



I bought a Woodstock pocket hole jig about 10 years ago. I was never all that impressed. The results where marginal at best. Used it this morning and it cut such sloppy holes that I called a friend who had raved about his Kreg jig and asked if I could borrow it for the day. I used the Kreg today and it is superior in every way. Easy to set up and use. It cut perfect holes and the joints are very tight.



The Woodstock is in the garbage and I'm ordering a Kreg.



Update. I have had the Kreg for a couple days and I just built a cabinet today with it. I didn't use a single nail and this sucker is strong. In fact it was a little hard to square up the carcass it was so rigid. Having the built in clamp allows you to work very fast.



I also bought the face clamp and right angle clamp, both worked very well and I would recommend them both. In fact if you will be doing big projects get 2 of each, they really speed things up.



I can't remember the last tool I was so excited about. Very well made, in the USA. This thing should hold up to daily use.

 "kreg jig" 2008-12-30
By William M. Walton
my experiance with this purchase was has been awesome.I received it when told and product is in listed condition.I would have no problem doing buisness with all involved in the future



Thanks W. Walton

 "Excellent" 2008-08-25
By Spinner (Burlington, VT USA)
This is meant for bench mounting work, where you pieces can be put into position and then drilled. Although not intended for this use, the drill guide section can be removed for portable use, but you will need to devise a clamping system to drill the workpiece. Highly recommended.

 "The Solution" 2007-01-30
By J. Woodward (Kansas City)
When it comes to building furniture, I'm a beginner at best. I often help a friend of mine in his wood shop in order to learn as much as possible. Over vacation, he was showing me his pockethole jig and showed me how easy it was to use as well as how stable of a joint it created. I order the 35mm Kreg K2 pockethole jig and have used it several times. I love it! It is easy to use and adjust. A must buy that even inexperienced woodmakers should consider.

 "excellent tool" 2006-06-26
By James Kehoe (Western Massachusetts)
I use this tool in my professional cabinet shop. It is durable, accurate and simple. The pocket holes it produce are strong and expedient alternatives to the floating tenons and dowels we previously used.


Images Product

Buy Kreg K2 Jig 3/8-Inch-Pocket Hole Jig Now

Kreg MKJ Mini Kreg Jig

Buy Cheap Kreg MKJ Mini Kreg Jig

Buy Low Price From Here Now
The single drill guide Mini Kreg Jig is Kreg's most positionable pocket hole tool. The jig is designed without an alignment fence which allows it to be clamped at virtually any angle or orientation to the edge of the workpiece. Great in situations where t
Readmore

Technical Details

- Mini jig drill guide
- No-fence, single-drill design allows it to be positioned in just about any location with ease
- Hardened steel drill guide; glass reinforced nylon jig body
- Unlimited material thickness and width
- Unlimited lifetime warranty
See more technical details

 "Great Add-on to Kreg Jig Sets" 2008-11-24
By Mitch and Gayle (Dallas, TX USA)
I love pocket hole joinery (strong and EASY). I already own the Kreg K3MS K3 Master Pocket Hole Jig System. I thought it would fulfill all of my pocket-hole needs. However, during a recent project, I needed to put a pocket hole in a tight place that the included jigs would not fit.



I ordered the mini-jig. Even though this jig requires a little more set-up than the Master jigs, it worked perfectly. It is a great add-on if you already have a jig set. I would not recommend it by itself because, at a minimum, you need the kit that includes the step drill bit as well as the square drive screws / bit.

 "Great for tight spaces" 2008-05-29
By SeaWolf's Home Workshop Blog (Florida)
This is a great little add on jig, if you already have a step drill bit and driver. The jig is great for getting into tight spaces or re-enforcing a loose joint that would be impossible with a full jig. I recommend you first make a test hole, as the directions did not specify enough jig offset to prevent screw head pull through allowing the screw come through the other side. An additional 3/8" offset solved the problem in ACQ 2" x 4" lumber and 2 1/2" stainless screws.

 "Good bang for the buck" 2006-08-02
By Keith Mealy (Cincinnati, OH USA)
At a fraction of the cost of most alternatives, this is a good deal and Kreg quality is generally realized as a class of its own.



However, for less than the cost of the components, you can buy this jig with drill bit and stop. I don't know why anyone would buy the jig by itself. See MKJKIT

 "The Kreg mini gives you the best for the least" 2003-12-14
By Bob Feeser (Springfield, PA USA)
When you think about it, this mini gives you the complete pocket hole capabilities with the least amount of money. (You'll need to buy the special drill bit as well for ideal results, both in starting the screw, and depth adjustability requirements) Since two holes are required for greater strength, you have to move the mini for each drilling. You could use an existing longer reach clamp to hold the mini in place, thereby eliminating the need to buy the clamp with it. So this mini is all of the advantages, without the price, but it requires more time to set up each project. Once you get into the advantages of pocket hole joinery, you probably will want more of the complete kit.
Kreg Pocket Hole offerings made the number one spot across the board in the November 2003 issue of Better Homes and Gardens "Wood" magazine. Everything from the mini on through to the automated production machine were given the top ratings. It was a clean sweep for Kreg. They tested a lot of machines too. Some of the advantages are the flush edge joining to the workpiece prevented tearout. The case hardened steel guides didn't show wear or metal shavings. Easy to make or buy the premade plug holes out of wood. (Some were an odd shape, and wouldn't accept plugs very well)
Even though the body is made out of plastic, which is substantial and well done, the steel guides are the only thing the drill bit touches.
Pocket hole joinery is a nice addition to your arsenal. You will find yourself incorporating it more and more into your projects, and the Kreg system is the best. Highly recommended.


Images Product

Buy Kreg MKJ Mini Kreg Jig Now

Kreg MKJKIT Mini Kreg Jig Kit

Buy Cheap Kreg MKJKIT Mini Kreg Jig Kit

Buy Low Price From Here Now
- Features a hardened steel drill guide and glass reinforced nylon body complete with a chip ejection hole - Features plug setter that is incorporated into the base of the jig
Readmore

Technical Details

- Makes pocket hole joinery work easier
- No-fence design makes for easy positioning
- One-hole jig is great for furniture repairs or flooring work
- Includes 3/8-inch step drill bit, depth collar, and Allen wrench
- Handy for repair applications and space constricted areas
See more technical details

 "Kreg Pocket Screw Jig" 2009-04-13
By Harry Malone
The jig does an excellent job aprx. 40 pocket holes on the first use and everyone was perfect

 "Could not be simpler, or more inexpensive..." 2009-02-21
By Jaronimo (NJ, the garden state)
I pulled out my Kreg jig for the first time today. I was building some face frames out of 3/4 by one and a half inch poplar. Since I had not used the jig previously, I read the instructions, which took about 60 seconds. I then set the collar on the drill bit to three and a half inches, then clamped the jig down on a piece of scrap wood.



Practice once or twice on some scrap because I learned the clamp needs to be tight and you need to use a relatively fast drill speed while using slow but steady pressure or the jig will slide. Once I tightened up my clamp (I used my welding vise grip with the swivel pads) and used the slow, steady pressure the jig worked great!



I put together three sets of face frames with 18 joints. Each joint had two screws, which required a separate jig set-up for each hole. The clamping, drilling, and screwing all 36 holes took me about 15 minutes total. The joints are perfect and did not even require sanding to even out tiny imperfections that I sometimes got when I used the biscuit joiner.



Overall I am very satisfied with this product.

 "does exactly what the manufacture claims" 2009-02-09
By Lenon Rampersad
this jig, makes joining a breeze. no need for clamps etc.

after some initial "blue plastic" was removed, the jig works perfectly with a cordless drill.

i will need to buy another as a gift.

 "The Best of a Good Thing" 2009-01-21
By Robert F. Monement (Sylvan Lake, MI USA)
If you want an excellent, quick joint, this is it! It won't replace a dovetail or a mortise & tenon but it requires far, far less work. Kreg gives you all the best options for pocket joinery and prices their products so reasonably there's no reason to buy anything less.

 "Quick and simple" 2008-12-20
By koboilila (massachusetts)
I bought this kit because I wanted a spare drill bit in my kit. You can adjust the collar for differnt thickness materials and instead of having one bit whose collar I need to move back and forth I can have one bit always set up for 3/4 inch material.



But I have used this type of jig before as well and it is great.



If you are the Harry The Happy Home Hobbiest type or a seasoned wood worker this is a nice thing to have within reach in your tool box. It works as well on the edge as it does the flat of your stock.



After you have found the best setting for the collar on the drill bit for your project and location for the jig just clamp it down on your piece and drill; thats all there is to it.



One word of advice: to keep the drill bits edges from getting beaten up too soon; place the bit into the hole before you turn on your drill and leave it in till the drill stops. A little respect for your tools goes a long way; I have used one of these for years and the bit is still nice and sharp.



Now go out and make some sawdust.


Images Product

Buy Kreg MKJKIT Mini Kreg Jig Kit Now

Kreg Jig K4 Pocket Hole System

Buy Cheap Kreg Jig K4 Pocket Hole System

Buy Low Price From Here Now
Priced roughly $40 less than the previous K3 model, this full-service pocket-hole drilling system is packed with value. It includes all the core equipment and everything you need to drill fast and easy pocket holes: a classic benchtop design, compatibility with all Kreg Jig Master System accessories, even a SkillBuilder DVD and rugged carrying case! For strong, convenient, and professional-looking joinery, this is it.

The K4 system includes the following:
-Main bench-mounting unit with toggle clamp
-Patented removable 3-hole drill guide
-Spacer block attachment for repairs
-3/8" step bit to drill pocket hole and 3/16" pilot hole in one step
-6" long #2 driver bit
-Dust Collection attachment
-Rugged carrying case, SkillBuilder DVD, and detailed instructions
Readmore

Technical Details

- Our patented 3-Hole Drill Guide lets you make perfectly placed Pocket-Holes in a wide variety of material widths and thicknesses, without ever having to release the clamp and reposition the workpiece
- Whether you’re using our multi-purpose Face Clamps or any common bar clamp or c-clamp, the Large Clamping Recess makes it easy to secure your jig to your workbench during use
- For the hard to reach repair applications, or when you just want to take your work on the road, the Kreg Jig’s removable Drill Guide guarantees that you’ll always have the right tool for the job
- Removable Drill Guide Block Doubles as a Repair Tool
See more technical details

 "great tool" 2009-07-19
By C. Miller (NY)
My husband had always wanted to try the pocket-hole jig,and now after watching the video and also one on cabinet making, he has made me a side table, and my 16-year-old son made a table for our deck. It is easy to use and took no time at all to make projects. Now he wants to make us all new kitchen cabinets!!! Great tool.

 "The easiest way to join anything" 2009-07-13
By zuiko
This is really well made. I resisted for a while because of the cost and the "do I really need another tool?" factor, but it is well worth the money. The jig is very well constructed. Better than I expected looking at the pictures. It is also good for some outdoors projects where you have to fasten 2x4s together (I use regular screws instead of the special kreg ones for that kind of stuff and they do work fine).

 "Excellent product" 2009-06-13
By Garage woodworker (Springfield, OR USA)
The Kreg jig is the only product I've ever purchased after watching an informerical and I am quite satisfied with it. After many years of trying to get solid/square joints with my limited home workshop tools, I was impressed with the results of the Kreg jig on a workbench I built for my son. The rail and leg joints were square, solid (no glue) and only took about an hour to drill and assemble. The instruction DVD included with the set was very helpful in explaining the basic set-up and uses of the jig. I think it will be one of the best tools in my workshop. My only concern was the necessity of buying the special Kreg screws. I found a local source for the Kreg screws however which means I don't have to order them online and the price is comparable to other wood fasteners.

 "How did live without it!" 2009-04-25
By G. Norman Riebel
I had a job to do that required me to assemble the work on site. I was able to precut all parts and predrill the pocket holes in the shop. The parts were then transported to the site and assembled. Glue was applied to the pieces and assembled and ready to finish in a short time. I do not know how long and how many clamps would have been required if I had used biscuits, dowels or any other type of assembly. This is probably one of the best specialty tools I have ever bought.

 "Great tool..." 2009-04-04
By Jennifer Savage
This was the perfect addition to our wood shop. Really, this is simple to use, and comes with a video to show how many uses this little gem has. We do a lot of wood joining, i.e. shelving, small furniture, picture frames, and I just think this tool has so many applications! Please watch the video or go to the website and watch the infomercial because there were a few applications they suggested that I had not considered.


Images Product

Buy Kreg Jig K4 Pocket Hole System Now