Buy Low Price From Here Now
For those times when pocket holes won't be hidden on the backside of your project or you want to highlight them decoratively, use pocket hole plugs. Plugs are offered in 7 solid wood species, and 5 plastic cap colors for use on laminated surfaces. 50 per
Readmore
Technical Details
- Covers up joint pocket holes- Plugs require minimal sanding to match pocket angles
- Package sealing prevents warping from moisture
- 50-count packages
- made from accurate dowel for minimal sanding
See more technical details
By Walter C. Mickens Jr.
just what the wood doctor ordered for a hole that needed a plug in it.
By rwizard (USA)
Yes, they work, and as Kreg warns you, they are cut a little long. But then, maybe that gives you an excuse to buy that nifty Japanese flush cut saw you keep fondling at the local wood working store ?
By koboilila (massachusetts)
No, Kreg did not invent the pocket hole jig, but they sure made it easily availble to the masses.
A pocket hole jig is a great addition to any shop and to make it even better Kreg has these little plugs to easily fill your holes when you're done.
I recall that the last time I was reading the reviews there were those who were crying that the plugs were too long; said that they had to speng forever sanding them down after they were glued in place.
The kind folks at Kreg did that on purpose fellas - one size fits all. Most home handy man types are probrobly using basic 3/4 inch stock but the pocket hole jig is great for a variety of thickness materials and thes plugs are made to use with thick and thin stock.
For 3/4 inch material I either set my small chop saw to about 30 degrees (putting a piece of scrapwood against the backing to hold the plug steady against) and lop off about a quarter of an inch off the fat end of the plug. If I am lazy or only need one or 2 plugs I just zip off a hunk quickly with my little band saw or scroll saw.
Put a little glue in the whole and slide the plug down till it is almost flush.
It dont get much easier than that.
By Richard Piatek
Tap it in. Sand or file it flush and finish. Very handy to have around the shop.
By New England Yankee (Northern New England)
I'm ambivalent about exposed, finished (plugged) pocket holes. Face it, they just aren't as attractive or decorative as, say, exposed dovetails. The fancied-up project you see in ads with contrasting color plugs doesn't improve things much, either.
Plugs DO work ... mostly. The basic problem is that the edge of a pocket hole is typically not very clean, so while the plug can be seated and glued in quite firmly, the effect at the edges still isn't pristine enough to my eyes to for finish quality. Other reviewers have commented on the large amount of protruding plug that has to be trimmed & sanded, which I wholeheartedly second.
I personally think the best use for pocket hole plugs is for painted work, where the plug can be made completely invisible.
Images Product
Buy Kreg P-OAK Oak Plugs for Pockets (50-Pack) Now
ไม่มีความคิดเห็น:
แสดงความคิดเห็น