Kreg SML-F125-1000 1 1/4-Inch No. 7 Fine Pocket Hole Screws with Pan-Head, 1000-Pack

Buy Cheap Kreg SML-F125-1000 1 1/4-Inch No. 7 Fine Pocket Hole Screws with Pan-Head, 1000-Pack

Buy Low Price From Here Now
Designed for use in pocket hole joinery. Washer head provides greater screw seat area, preventing crushed pockets & run through in particle board and softer woods. Self-tapping auger points provide easy installation and minimal splitting. The dri-lube finish reduces friction for easy installation and protects from rust. Fine thread screws recommended for screwing into hardwoods.
Readmore

Technical Details

- Hole screws prevent overdriving in pocket bottoms
- Self-tapping auger tips do away with predrilling
- Large diameter of steel shank creates durable screw
- Bronze-colored finish helps improve driving torque
- Impressively strong screw that is almost impossible to break
See more technical details

 "Best Screws for High Torque" 2009-04-03
By D. Tennyson
The Kreg SML-F125's are the best "washer head" screws for a high torque glueless situation. Best I've found anywhere. So there's no confusion the "SML" are washer head not pan head.

 "Gotta have 'em" 2008-09-18
By Rogue Valley Rick (Southern Oregon)
I haven't used my pocket hole system yet, but I will. What can I say? You gotta have screws to do the job!

 "Perfect" 2008-08-27
By Pablo Skye (Berkeley, CA)
Every Kreg product I've ever used -- and I have most of them -- is superb.

 "Great product for pocket holes!" 2007-07-03
By David James (Northville, Michigan)
I use these screws to build face frames, cabinets, and boxes from hardwood (maple, oak, etc) and they work great. I have never had a piece of wood split from driving the screws in, due to the drill-points. And they work perfectly with the pocket hole jig. Highly recommended.

 "Kreg SML-F125-1000 Pocket Hole Screws " 2007-01-09
By Fredrick M. Zahn (Simi Valley, CA United States)
A Good bargain if you plan on building lots of frames using your kreg jig. These screws are made specifically for the Kreg jig tool. It's hard to find these screws locally or they come in small bags or multi size packs. This is the size I use the most so I stocked up.


Images Product

Buy Kreg SML-F125-1000 1 1/4-Inch No. 7 Fine Pocket Hole Screws with Pan-Head, 1000-Pack Now

Kreg SML-C125 1-1/4-Inch No. 2 Coarse Screw (1000-Pack)

Buy Cheap Kreg SML-C125 1-1/4-Inch No. 2 Coarse Screw (1000-Pack)

Buy Low Price From Here Now
Kreg's self-tapping screws were designed for its famous pocket-hole joinery, but that's not all they're good for. Kreg's self-tapping auger point eliminates time-consuming pre-drilling, and these screws are made from the highest quality steel, case-hardened and coated with a dri-lube finish. That means less driving torque for you. This coarse-thread screw has a larger thread diameter and provides greater holding power when driving a screw into soft material such as plywood, particle board, MDF, melamine and pine. The washer head offers a great surface area to seat the screw firmly and helps prevent overdriving. They're on the spendy side, but the quality is worth it.--Kris Jensen-Van Heste
Readmore

Technical Details

- 1,000-pack of softwood to softwood #8 coarse screws
- Designed for pocket-hole joinery
- Self-tapping auger point eliminates pre-drilling
- Casehardened, steel coated and dri-lube finished for easier driving
- Large-thread diameter for greater holding power
See more technical details

 "You won't get s______ with this purchase! ;o)" 2009-05-10
By Jack P. Nunes (Herald, CA)
This is the only way to buy these excellent but pricey screws. They are not only super for pocket holes but for other assembly when you need that washer to draw material together. Great buy, great product.

 "More for the money" 2009-01-09
By Joseph M. Baringer
After researching internet for pocket screws, I found Amazon was the cheap by quantity. If you planning to build alot of wood projects then purchase in bulk to save you money and time in long run. I am planning to build several bookcases for the our office and under the stairs so this purchase provide me with enough screws to complete without having to continiously purchase more screws. Additionally, I like using enough screw to make sure the bookcase is strong enough to move without breaking.

 "The RIGHT screw makes a BIG difference" 2008-12-18
By Anthony W (Texas)
Great screw for soft wood and sheet materials. I've had problems with wood splitting in the past whenever I didn't remember to pre-drill holes. This is the first time I've been able to simply drive screws without pre-drilling. Great time-saver.

 "Kreg -SML 1-!/4-inch Coarse Screws" 2008-09-06
By Kenneth Broughton
Great screws to use in woodworking projects. The Kreg system makes quick work of project asemble.

 "Best square drive screws available" 2008-06-07
By Kevin L. Cradic (Kansas City area)
I have YET to break a KREG screw off doing something. They just work. What more can a person want in woodworking? I wouldn't use anyone else's screw for pocket hole joinery.



Best to buy in bulk if you find yourself using one particular size. The more you buy of them the more you save. It's a nice way to join wood and hide the joinery as well.


Images Product

Buy Kreg SML-C125 1-1/4-Inch No. 2 Coarse Screw (1000-Pack) Now

Kreg DDS 3-Inch No.2 Square Driver Bit and 6-Inch No.2 Square Driver Bit for Kreg Pocket Hole Systems

Buy Cheap Kreg DDS 3-Inch No.2 Square Driver Bit and 6-Inch No.2 Square Driver Bit for Kreg Pocket Hole Systems

Buy Low Price From Here Now
For our H9242 Kreg Super Kit
Readmore

Technical Details

- 3-Inch and 6-Inch lengths offered
- Deep 2 driver recess resists cam-out
- 3-Inch length is great in tight spots
- 6-Inch length is easy to use
- Drivers come in standard or hardened tip version
See more technical details

 "Works as described" 2009-04-24
By G. Bounds
Works as described. I purchased the set to have the 3 inch for tight quarters.

 "good stuff" 2009-04-15
By Brian K. Anderson
Name brand products are the only way to go when it comes to most things, woodworking being one of them. Kreg products are made for the professional and always recommended....

 "Cheap and effective - I love the long bit" 2008-12-06
By New England Yankee (Northern New England)
It's counterintuitive, but the long bit is actually the easiest to use and most stable when driving pocket screws. The Kreg bits are very well made, hardened, and don't wear as fast as ordinary square drive bits. That's particularly important when doing pocket hole construction - there's nothing more frustrating than a stripped bit or screw head halfway in a pocket hole. In fact, I keep my Kreg bits separate and only use them for pocket holes. I use my regular bit set square drive bits for other square drive uses and toss them as they wear.

 "Good for tight spots" 2008-11-16
By Samurai Dave (Ventura, CA)
I usually keep the 6" in the dril, but when you have a tight space to work the shorter length bit can help save the day. ;-)

 "Handy spares" 2008-09-18
By Rogue Valley Rick (Southern Oregon)
The price is right. Even though I haven't used these yet, I know I will in the future. Well made and useful.


Images Product

Buy Kreg DDS 3-Inch No.2 Square Driver Bit and 6-Inch No.2 Square Driver Bit for Kreg Pocket Hole Systems Now